|
Post by Senseless on Apr 26, 2008 14:07:15 GMT -5
|
|
|
Post by Senseless on Apr 26, 2008 16:35:37 GMT -5
Ok i'm finding out that part comes only with the entire bare head assy. so I need a DOHC Vtec warped head or just that part anyone know anybody? I just really dont need to spend $400 on a full GSR head for no reason. Thanks!
|
|
|
Post by etphil on Apr 27, 2008 11:09:41 GMT -5
Double checked, it def doesn't look like you can get that anywhere. I don't believe Jeff has anything lying around but I will ask.
|
|
|
Post by dohcterek on Apr 27, 2008 13:32:36 GMT -5
what sucks is that junk yards wont normally rip heads apart for just one part. I might take some searching for someone who has an extra bad head laying around. I ll look around when i get a chance for you.
|
|
|
Post by dohcterek on Apr 27, 2008 13:37:19 GMT -5
also if not, from what i have read, the b16 head out performs the gsr head so you could always pick one up.
|
|
|
Post by etphil on Apr 27, 2008 16:45:18 GMT -5
what sucks is that junk yards wont normally rip heads apart for just one part. I might take some searching for someone who has an extra bad head laying around. I ll look around when i get a chance for you. What sucks even worse is that most times yards don't have these heads laying around very long anyway.
|
|
|
Post by area1320 on Apr 27, 2008 23:41:58 GMT -5
Scott, the reason why you can't get cam caps separately and only with a complete head is because of clearance issues. They may be too great or too little. Just find a used head and have at it so you have a matching set.
When they build those they put the caps on without the cams, then run a bore through to size them all up. If you don't have the correct ones on there you will run into oiling issues.
|
|
|
Post by Senseless on Apr 30, 2008 18:04:04 GMT -5
Yeah I found one warped head on ebay but the guys feedback sucked so now I'm having that little piece welded for now. I wouldnt even worry about it but with all that boost the crank case pressure is going to be blowing oil all over the fucking place lol kinda like my hatch. I'm doing the catch tank out of the front of my valve cover with the welded on AN fittings but it would still blow out of that corner.
|
|
|
Post by Senseless on Apr 30, 2008 18:06:53 GMT -5
what sucks is that junk yards wont normally rip heads apart for just one part. I might take some searching for someone who has an extra bad head laying around. I ll look around when i get a chance for you. What sucks even worse is that most times yards don't have these heads laying around very long anyway. Yeah and the odds of them taking one apart for me..not gonna happen. I'll take care of it it's no big deal really.
|
|